Expert in bulk transportation packaging




Tel.: +86 533-2180 565

Fax.: +86 533-8170 944

E-mail: info@

Add.:#51,Lutai Rd.,Zibo,
        Shandong Pro.,

Current position:Home > Products > Liquid Bulk Packing > Heating Pad
Heating Pad

Content display

Heating Pad
release time:2018-06-05 16:36:27 Click to browse:
1. Heat Pad Type: No#HP1 Heating Pad, No#HP2 Heating Pad, No#HP Heating Pad.
2. Heating Pad Resource :steam & hot water
3Application: Used with Flexitank when it transport 
easy-crystallized liquids like fatty acid,
                       honey,syrup,palm oil,animal oil,glycerin,coconut oil,etc.

Specification of Heating Pad
Inside diameter
8 mm
Outside diameter
Outlet hose
(reinforced rubber ) 34mm
Inlet hose
Working pressure
< 0.2 Mpa
Temperature range
< 150
Heat source
Steam / Hot Water
Layout dimension
5 m X 2.3 m
Heating Time 8Hr.-12Hr.
Weight 30 KGS

Heating Pad FAQ:
1. Can we use electric to operate the Heater Pad?
    No, ANTHENTE heater pads do not operate with electric. It operates with Low Pressure 
    un-trapped steam, 
not exceeding 15 psi.
2. Is it possible to use hot water to operate the heater pad?
    Yes, it is OK to use hot water but the reheating time will be longer.
3. Can the heater pad be reused?
    Yes, the heater pad is designed to be durable for reuse. If it is well taken care of, the
    heater pad 
can be reused for 6-10 times.
4. What is the right steam temperature to use to achieve maximum heating result?
    The right steam to set should be at 15 psi (psi = pound per sq inch). The steam in the 
    range of 12 
psi will generate temperature of approx. 121°C (250°F). This will enable 
    the heater pad to provide 
enough heat to melt the product. DO NOT EXCEED 15 PSI. 
    The higher temperature resulting from 
operating above 15 psi will melt the flexitank 
    and cause a total failure of the liner.
5. How do I operate the heater pad?
    A copy of our Heater Pad Operating Manual will be made available to you upon request.
6. How long does the heater pad take to reheat / melt the product?

    Using 10-15 psi un-trapped steam, the system is designed to raise the product 
    temperature 12°C in 48 hours. Please consult with us regarding specific requirements.

Previous:没有了 Next:没有了

Submit Message

Company Name
友情链接:    福彩3D试机号前后分析   微信买彩票合法吗   微信买彩票合法吗   爱彩通11选5   k8彩乐园注册